Atlas Copco Xas 185 Jd7 Manual.zip
Download ::: https://tlniurl.com/2tubR8
How to Use and Maintain Your Atlas Copco XAS 185 JD7 Air Compressor
If you are looking for a reliable and efficient portable air compressor, you might want to consider the Atlas Copco XAS 185 JD7. This unit is powered by a liquid-cooled, 4-cylinder Kubota diesel engine that complies with the T4F emission standard[^4^]. It has a single-stage, oil-injected, rotary screw type air end that incorporates the new generation C67 screw element[^4^]. It can deliver up to 185 cfm of compressed air at a maximum working pressure of 100 psi[^4^]. In this article, we will show you how to use and maintain your Atlas Copco XAS 185 JD7 air compressor, as well as provide you with some troubleshooting tips and resources.
How to Use Your Atlas Copco XAS 185 JD7 Air Compressor
Before using your Atlas Copco XAS 185 JD7 air compressor, you should read the instruction book carefully and follow all the safety precautions. You should also check the oil level, coolant level, fuel level, air filter condition, and tire pressure before starting the engine[^2^]. To start the engine, you should turn the key switch to the ON position and press the start button. The engine will automatically adjust to the ambient temperature and altitude[^2^]. To stop the engine, you should press the stop button and turn the key switch to the OFF position[^2^]. To adjust the working pressure, you should use the pressure regulator knob on the control panel. You can also monitor the engine speed, oil pressure, coolant temperature, fuel level, battery voltage, and service hours on the digital display[^2^]. To connect your air tools or equipment to the compressor, you should use the air outlet valve on the rear of the unit. You should always use hoses and fittings that are compatible with the compressor's specifications and ensure that they are in good condition[^2^]. You should also use a safety valve and a pressure gauge on your air line to prevent overpressure and monitor the air flow[^2^].
How to Maintain Your Atlas Copco XAS 185 JD7 Air Compressor
To keep your Atlas Copco XAS 185 JD7 air compressor in optimal condition, you should perform regular maintenance according to the service plan and schedule provided in the instruction book. You should also keep a logbook of all the service and repair activities performed on your unit[^2^]. Some of the main maintenance tasks include:
Changing the engine oil and oil filter every 500 hours or once a year[^2^].
Changing the coolant every 2000 hours or once every two years[^2^].
Changing the fuel filter every 500 hours or once a year[^2^].
Changing the air filter every 500 hours or more frequently if operating in dusty conditions[^2^].
Changing the compressor oil and oil filter every 1000 hours or once a year[^2^].
Changing the separator element every 2000 hours or once every two years[^2^].
Checking and adjusting the belt tension every 500 hours or once a year[^2^].
Checking and cleaning the radiator and cooler every 500 hours or more frequently if operating in dusty conditions[^2^].
Checking and lubricating the wheel bearings every 1000 hours or once a year[^2^].
Checking and replacing the spark arrestor every 2000 hours or once every two years[^2^].
Checking and testing the safety devices every 500 hours or once a year[^2^].
Checking and cleaning the battery terminals every 500 hours or once a year[^2^].
You should always use genuine Atlas Copco parts and lubricants for your unit. You can find them in the parts list that comes with your unit or download it from here [^1^]. You can also contact your local Atlas Copco representative for any service or parts inquiries [^3^].
How to Troubleshoot Your Atlas Copco XAS 185 JD7 Air Compressor
If you encounter any problems with your Atlas Copco X a474f39169